name: WT-181 title: Device Data Model for CWMP Endpoints and USP Agents shorttitle: Device Data Model shortertitle: TR-181 tagline: TR-181 Documentation and Theory of Operations summary: | See for the current TR-181 specification. description: | TR-181 Issue 2 defines version 2 of the Device data model (Device:2). The Device:2 data model applies to all types of TR-069 or USP enabled devices, including End Devices, Residential Gateways, and other Network Infrastructure Devices. The Device:2 data model defined in this Technical Report consists of a set of data objects covering things like basic device information, time-of-day configuration, network interface and protocol stack configuration, routing and bridging management, throughput statistics, and diagnostic tests. It also defines a baseline profile that specifies a minimum level of data model support. The cornerstone of the Device:2 data model is the interface stacking mechanism. Network interfaces and protocol layers are modeled as independent data objects that can be stacked, one on top of the other, into whatever configuration a device might support. reponame: device-data-model resources: specification: title: TR-181 Document data-model: title: Data Model restype: root resname: Device versions: v2.21.0: date: 2026-06-01 changes: data-model: | * Added a CipherList parameter to configure permissible TLS Ciphers * Added a few more datatypes, sensors and controls to IoT datamodel * Added AFC Support to native Wi-Fi datamodel * Added AllowedChannels parameter to Wi-Fi configuration * Added Boot timing information * Added certificate and repository provisioning support to Software Modules * Added command and extended datamodel to support device shutdown * Added ContentType and ResponseTopic parameters to MQTT Publish() command * Added CountryCode and DeviceStatus parameters to DeviceInfo * Added datamodel support for device hardware buttons * Added Description parameter to network interfaces to allow user-friendly labelling * Added DNS resolver statistics and resolving strategy configuration * Added ForceSolicitPolicy parameter to DHCPv6 * Added InterruptRate parameter * Added Kernel and Process fault information * Added LastChange parameter to IPv6 RA * Added MLD and IGMP enablement parameters to Bridge * Added more commands to handle TLS certificates on the device * Added more modes to STP configuration * Added more TLS certificate components for easier reuse * Added MQTT broker security configuration * Added network hardware offloading support * Added NetworkDiagnostic() command to Thread * Added OnMessage! event to MQTT datamodel * Added parameter to show available RAM * Added RegisterTrustPaths parameter to limit which datamodel paths can be registered * Added signature verification support to Software Modules * Added solicitation timing parameters to Neighbor Discovery * Added Status to the DHCPv4 lease information * Added support for stopping QoS classification rules * Added support for a list of known SFPs and the ability to disable certain modules * Added support for controlled LEDs * Added support for enforced DHCP options * Added support for IPv6 Network Prefix Translation * Added support for multiple MQTT Broker processes * Added support for Software Modules managed locally on the device * Added support for TUN/TAP interface configuration * Added support for user HomeDirectory * Added timestamp for last firmware release and update * Clarified and harmonized some descriptions in Software Modules * Clarified use of STA parameters in Data Elements * Expanded the IEEE1905 data model * Expanded interface Upstream parameter description with more examples * Expanded IPSec IKEv2 configuration * Extended Syslog datamodel with support for Unix domain sockets * Improved and reworked the IPLayerCapacity test datamodel * Moved AggregateScanDuration and ScanType to ChannelScan object * Removed inappropriate character size limitations from lists * Restructured Device.NeighborDiscovery object * Unified country code parameters to be always exactly 2 uppercase characters * Updated MoCA ACA Status with proper enumeration values and descriptions specification: | * Added log rotate ToO * Added MQTT ToO * Added certificate management ToO v2.20.1: date: 2025-12-01 changes: data-model: | * Fixed Cellular APN type to be compatible with the 5G Data Network Name * Changed Cellular SIM Location parameter to be read-only * Added additional bibrefs to PON power safe parameter * Changed TrustedElement PIN from being a string with maximum size 4 to be a digit-only string with a size between 4 to 8 * Changed TrustedElement Status parameter to be read-only specification: | * No changes v2.20.0: date: 2025-11-17 changes: data-model: | * Added support for periodic file uploads via Device.PeriodicFileTransfer. * Added support for hardware specific information under Device.Hardware. * Added support for configuring device internal connection monitoring mechanisms and automatic remedies under Device.ConnectionMonitoring. * Various features allow to specify a Certificate and a CABundle for mutual TLS authentication * Added support for low and high temperature events in Device.DeviceInfo.TemperatureStatus.TemperatureSensor.{i}. * Added support for the Wi-Fi Data Elements feature "Wi-Fi Configuration Templates" under Device.WiFi.Templates. * Added Device.DeviceInfo.Reboots.CurrentBootCycle * Added peripheral power management for - Ethernet to Device.Ethernet.Interface.{i}. - USB to Device.USB.Port.{i}. - Wi-Fi to Device.WiFi.Radio.{i}. - Thread to Device.Thread.Radio.{i}. - XPON to Device.XPON.ONU.{i}.PowerManagement. * Added USB device state reporting and the ability to configure which USB devices are allowed to connect via the Device.USB.USBHosts.AllowedDevice.{i}. table * Added Type and Interface parameters to Device.HomePlug.Interface.{i}. * Marked Wi-Fi commands FullScan(), ChannelScan(), Disassociate(), and BTMRequest() obsoleted * Added antenna configuration to Device.WiFi.Radio.{i}. * Added a full WireGuard VPN datamodel under Device.WireGuard. * Added Device.WiFi.Radio.{i}.Capabilities. tree * Added MTU parameter to Device.WiFi.SSID.{i}. * Added IPLayerCapacityIncrementalResult! event to Device.IP.Diagnostics. * Improved Device.Routing.Router.{i}. support and added Device.Routing.Policy.{i}. * Added host table cleanup support to Device.Hosts. * Added Device.DNS.RebindProtection. * Added Release() command to Device.DHCPv4.Client.{i}. and Device.DHCPv6.Client.{i}. * Added the configuration of the UPnP IGD service via Device.UPnP.Device.IGD. * Added FloodLimit and BurstLimit parameters to Device.Firewall.Chain.{i}.Rule.{i}. * Added support for GetCertificateURI() under Device.Security.Certificate.{i}. * Added Role configuration to Device.SoftwareModules.ExecutionUnit.{i}. * Added authentication to UDS MTP via Device.UnixDomainSockets.Authentication.{i}. * Added interface stack and IP address support to Device.SessionManagement.Session.{i}. * Added support for Device.IoTCapability.{i}.PulseControl. and Device.IoTCapability.{i}.Binding.{i}. * Improved descriptions of some parameters with ranged types * Added support for setting the transport mode in the MQTT Broker configuration * Miscellaneous spelling corrections and markup improvements specification: | * Recreate session management SVG images to match current state v2.19.1: date: 2025-04-23 changes: data-model: | * Fix the order of some datamodel objects in the rendered HTML * Explain permissions behaviour for Get messages * Add missing spec attributes, messing up the diffs from future versions specification: | * Re-export some SVG images to address rendering artefacts from invalid data * Adjust the data model paths in the examples to match the recent data model changes v2.19.0: date: 2025-04-10 changes: specification: | * Improved firewall configuration appendix * Introduced new 3GPP NAS Theory of Operation appendix * Deprecated 5G Theory of Operation appendix in favor of the new appendix data-model: | * Included LinkReadWrite component instead of Link component on all networking interfaces and automatically create most of the Parameters * Added support for Cellular short message service * Revamped Device.Cellular.Interface. * Made previously USP-only Device.CollectionDevice. available to CWMP * Added note about limited abilities of Device.SoftwareModules. in CWMP * Addressed some versioning issues in the CWMP specific datamodel * Added ability to rotate KernelFault and ProcessFault entries * Added more features to DHCP configuration and Stats for DHCP use * Added logging support for Firewall in Device.Firewall.Log.{i}. * Added BlobSensor to IoT * Added the latest IPLayerCapacity diagnostics features, including authentication, better status and results * Added more LED control parameters * Added ALPN support to MQTT * Added SFP support via Device.SFPs. * Added SFP support to Device.Optical.Interface.{i}. * Deprecated Device.PDU. * Added new 3GPP mobile network session management support via Device.SessionManagement. * Added Radius security via Device.RadSecProxy. * Added TLS support to SysLog * Added support for the Thread protocol via Device.Thread. * Added support for trusted elements (e.g. mobile SIM) via Device.TrustedElements. * Added support for Wi-Fi DataElements r4 * Added support for Ethernet advertised link modes * Changed writeOnceReadOnly Parameters to readOnly in CWMP * Added support for power monitoring via Device.DeviceInfo.PowerStatus. * Added selection of IPv4/IPv6 mode to NTP client * Added new permission system for USP services * Revamped Bitrate parameters into a component * Revamped IPVersion parameters into a component * Revamped DHCP client configuration into components * Added some missing units to IoT * Revamped client certificates into a component * Added support for CA bundles in Device.Security.CABundle.{i}. * Refactored Device.SoftwareModules. into its own file * Added Privileged parameter to Device.SoftwareModules.ExecutionUnit.{i}. * Added Device.Thread.MLE.{i}.AssociatedNode.{i}.Neighbor.{i}. * Added RegisterTrustPaths parameter in InstallDU() and Update() commands and Device.USPServices.Trust.{i}. v2.18.1: date: 2024-09-04 changes: data-model: | * Fixed newly introduced parameter name from IPv6PassTroughICMPEchoRequest to IPv6PassThroughICMPEchoRequest * Replaced manual Alias definition by use of component * Fixed invalid syntax in description of Device.DNS.Client.Server.{i}.Type v2.18.0: date: 2024-07-23 depends-on: WT-106: v1.14.0 changes: specification: | * Fixed logical interface table * Added ToO chapter about network interface MTU * Manually resized diagrams to look nice * Updated all generated diagrams data-model: | * Added more counter types to IoT * Improved MoCA network state parameter descriptions * Added new parameter to support VLAN priority * Added new parameter to indicate the used Ethernet duplex mode * Improved example Ethernet PHY types by using more commonly used types * Added new parameter to control the sending of ARP messages on an Ethernet link * Corrected access type of multiple parameters * Added new parameters for IP based access control in HTTP access * Added new parameter to configure the MTU on an Ethernet link * Added new parameter to link a USPService to an ExecutionUnit providing it * Extended size of various QoS parameter types from 32 bits to 64 bits types * Added new parameter to control filtering of ICMPv6 packets * Changed one more missed parameter from hidden to secured * Added new parameters to control DHCP retransmission/retry behavior * Removed some dmr:fixedObject attributes from non-fixed objects * Added Device.Schedules. mechanism to define time-based schedules for services to use * Added new parameters indicate the reason for a device reboot * Added new parameters to configure and check the Ethernet MDIX mode * Deprecated a decent number of MultiAP commands and parameters due to being supported in DataElements * Refactored many Interface and Link objects, parameters and commands into components for deduplication * Refactored and improved the description of the NetworkConfig object * Replaced outdated DHCPv6 bibref by latest RFC * Added Reset() command to various interface stats objects * Promoted some readOnly parameters to readWrite * Added source and dest port ranges to more firewall objects * Added success and failure counters to IEEE802.1x supplicant stats * Added 3GPP-NAS auto configuration type to various enumerations * Added RemainingLeastTime to port-mapping objects * Demoted a few readWrite objects to readOnly since they were never meant to be the former * Added histogram mode to PeriodicSampling mechanism * Added more informational parameters and ShutdownDelay as well as user configuration to SMM DUs * Added system capabilities configuration to Users * Changed parameter type of some Wi-Fi timestamps from string to datetime * Clarified the credentials allowed usages * Added UUID, Version, and ExecEnvRef as output arguments to the InstallDU() command * Adjusted indentation to fix rendering issues * Added missing Alias keys throughout the data model * Removed some inappropriate dmr:noUniqueKeys annotations v2.17.0: date: 2024-01-18 depends-on: WT-106: v1.13.0 changes: specification: | * Refreshed some data model diagrams data-model: | * Added new parameters for Multi-flow and Multi-server testing capability as defined in TR-471 Issue 4 * Updated MoCA data model with MoCA Alliance 2.5 specification * Added Device.DNS.SD.Advertise object to to allow the configuration of DNS-SD services that need to be advertised by the device * Added RDNSS and DNSSL options to the Device.RouterAdvertisement.InterfaceSetting.{i}. object * Added missing parameters from the Data Elements R2.1 specification * Added the Zone file concept to the Device.DNS. object * Added DNS caching configurability to the Device.DNS.Relay. object, allowing for control over the cache settings, added a mechanism to allow the specification of the ingress (LAN side) interface(s) to be used by the DNS forwarders * Added new InterfaceSetting object to Device.Firewall. * Added ModuleVersion parameter to InstallDU() and Update() commands * Added Origin parameter to PinHole, PortMapping and AccessControl * Added PhysAddressMask parameter to AccessControl * Added LeaseDuration and RemainLeaseTime parameters to the DMZ and Pinhole objects * Added Device.Firewall.ConnectionTracking. object tree to configure ALGs * Added missing DSL xTU-C and xTU-R parameters to DSL objects * Added Device.Syslog. object tree to configure a syslog service * Added Support for password authentication in xPON * Added MaxNumberOfPortMappings and MaxNumberOfPortTriggers parameters to indicate system limits * Fixed the access of some UserInterface parameters and objects: Demoted Session and User to read-only, promoted Protocol to read-write * Fixed the access of a SSH parameter: Promoted AutoDisableDuration to read-write * Fixed the access of a USPServices parameter: Demoted Protocol to read-only * Added UDSAgent:1 and UDSController:1 profiles * Added Device.DeviceInfo.LogRotate.{i}. to setup a log rotation mechanism * Clarified descriptions of parameters in Device.SoftwareModules.ExecutionUnit.{i}.AutoRestart. * Added initial support for the 802.11be Wi-Fi 7 standard/mode in various places * Added OnBoardingComplete parameter to Device.LocalAgent.Controller.{i}. * Clarified suggested implementation of Device.PeriodicStatistics. concept * Added support for passing environment variables to software modules * Removed reference to an incorrect default port requirement from TR-471 * Added EEEStatus parameter to Device.Ethernet.Interface.{i}. * Extended the key of Device.LocalAgent.Monitor.{i}.OnChange! ChangeSet.{i}.Parameter.{i}. output argument to include ChangeTime * Added objects and parameters to align with the work-in-progress DataElements R3 specification * Refactored scheduling related parameters into component for easier reuse and added Active and TimeLeft parameters * Added Device.SoftwareModules.ExecutionUnit.{i}.NetworkConfig. object and parameters * Added MaxSupportedDataDownlinkRate, MaxSupportedDataUplinkRate, SNR, and MaxSupportedBandwidth parameters to Device.WiFi.AccessPoint.{i}.AssociatedDevice.{i}. * Replaced custom coded Order parameter type and descriptions with the new Order datatype and text template * Changed the default WebSocket port from 5683 to 8443 * Added support for checksum reporting to TransferComplete! event v2.16.0: date: 2023-06-14 depends-on: WT-106: v1.12.0 changes: specification: | * Refreshed all diagrams * Added ToO appendix for logical interfaces concept * Extended advanced firewall appendix * Updated Wi-Fi theory of operation data-model: | * Added Device.LocalAgent.Subscription.{i}.TriggerAction parameter to control the notification behavior * Added SecuredRoles concept to the USP-specific ControllerTrust * Turned a number of "hidden" parameters into "secured" parameters to allow USP Controllers with a secure role to read parameter values * Added a few parameters to Device.Bridging.Bridge. and sub-objects to allow better control over bridges and STP behavior * Made unique key type (functional vs non-functional) explicit rather than defaulting, and fixed incorrect choices * Added ability to configure exclusions from BulkData reports * Added Device.DeviceInfo.HostName parameter * Unified description of Interface parameters * Updated status according to our deprecation policy * Extended some incorrect type restrictions * Fixed/unified some units and their use in the description * Added SupportedLinkModes parameter to ethernet interfaces * Clarified the Device.Firewall. object and added support for firewall features DMZ, Services, Pinholing and Policies. Also added support for additional classifiers * Introduced Device.GatewayInfo. into USP * Extended the type of a few counters from unsignedInt to StatsCounter64 * Added new IPLayerCapacityDiagnostic parameters/arguments from the TR-471i3 document * Added UDS (Unix Domain Socket) MTP and Device.UnixDomainSockets. objects for internal services * Added Device.Logical. sub-tree to allow for definition of logical network interfaces * Added Device.NAT.PortTrigger. * Added USP notification mechanism to Device.PeriodicStatistics. * Improved PPP LCPEcho description and added LCPEchoAdaptive parameter * Vastly extended Device.QoS. features by adding Queues, Shapers and Schedulers * Added new parameters to Device.Routing. and sub-objects to add more routing features * Vastly extended SMM (Software Module Management) capabilities with support for ApplicationData, HostObject, ExecEnvClass and AutoRestart * Added Device.SSH. to configure an SSH service * Extended Device.Time. with support for NTP client and server configuration * Added Device.UserInterface.HTTPAccess. to allow for local UI access control * Added USP-specific Device.LocalAgent.Monitor. object to allow for efficient tracking of parameter value changes * Added support for Device.USPServices. to manage internal services via USP * Added Device.XPON. to model xPON interfaces * Applied cleanup for Wi-Fi objects/parameters to line up with Wi-Fi Alliance documents * Removed activeNotify="canDeny" attributes from some parameters * Added PeriodicStatsAdv:2 and MQTTController:2 profiles * Added USPServiceRef parameters to MTP referencing a service using it * Disambiguated NTP vs. SNTP protocols * Expanded/unified descriptions of parameters used for retries v2.15.1: date: 2022-04-06 changes: data-model: | * Removed items that were erroneously added to the User:1 profile and instead added them to a new User:2 profile * Fixed the BulkData Profile Parameter reference; it's a string, not a formal path reference * Fixed the InstallDU() command's ExecutionEnvRef argument; it references an execution environment, not an execution unit * Fixed the VendorConfigFile description's CWMP/USP-specific text v2.15.0: date: 2022-01-27 depends-on: WT-106: v1.11.0 editors: - William Lupton, Broadband Forum changes: specification: | * Converted the document to markdown and extended the Wi-Fi Theory of Operation data-model: | * Split the XML into multiple smaller files (this is just housekeeping; it doesn't affect how the model is used) ::: CWMP ::: * Added Device.USPAgent to the CWMP model to allow a CWMP ACS to configure a device for USP communications ::: ::: USP ::: * Allowed USP to access the EnableCWMP parameter (so a USP Controller can enable/disable CWMP access) ::: * Added Device.Routing.Babel for the RFC 8966 Babel routing protocol * Added Device.DOCSIS for modeling DOCSIS 3.0 and 3.1 interfaces * Added Device.Users.Group, Device.Users.Role and Device.Users.SupportedShell tables for modeling system users * Improved the Wi-Fi data model by adding Data Elements R2 parameters, commands and events, moving MultiAP parameters and commands into the Data Elements structure, and by deprecating AIFSN, ECWMin, ECWMax and TxOpMax * Clarified the LockoutPeriod and Retries ControllerTrust parameters that impact how the RequestChallenge() and ChallengeResponse() data model commands handle failed attempts * Clarified bulk data profile, threshold and periodic statistics USP Controller permissions: only the USP Controller that created the profile will receive the corresponding events ::: USP ::: * Added a bulk data profile ForceCollection() command ::: * Added support for a new bulk data collection mechanism that utilizes MQTT as the transport protocol ::: USP ::: * Removed old bulk data collection protocols (Streaming and File) from the USP data model (they don't apply to USP) * Updated the IPLayerCapacity() test to support TR-472 Issue 2 * Added an enumeration to indicate when a Boot! event was due to a factory reset * Added an enumeration to distinguish encrypted and unencrypted USP MQTT WebSocket connections * Added an Order parameter to provide guidance to USP Agents on which MTP to use when communicating with a Controller ::: * Clarified that Device.Optical is intended for generic optical interfaces and is not intended to model anything specific to IEEE or ITU-T PON technologies (objects specific to such technologies may be added in future versions of the data model) * Clarified the meaning and usage of the Device.Ethernet.Interface and Device.Ethernet.Link objects (also allowed the Ethernet Link MACAddress parameter to be written) * Improved (and made more consistent) the marking of (and explanation of) deprecated items, and how such items should progress from being deprecated to obsoleted to deleted * Added a Baseline:4 profile that doesn't include Device.LANConfigSecurity (it relates to the now-deprecated TR-064 LAN management protocol) ::: CWMP ::: * Many minor improvements to object and parameter descriptions ::: ::: USP ::: * Many minor improvements to object, parameter, command and event descriptions ::: * Replaced the non-standard dmr:version attribute with the version attribute (which supports three levels of version) * Switched to DMR (data model report) schema v1.0, which supports multi-line paragraphs, and wrapped all lines to 80 characters maximum v2.14.1: date: 2020-11-17 changes: data-model: | ::: USP ::: * Fixed Device.LocalAgent.Subscription.{i}.ID constraints ::: ::: CWMP ::: * Removed duplicate remarks about CWMP BOOTSTRAP from descriptions ::: * Fixed typos v2.14.0: date: 2020-11-05 editors: - David Woolley, Telstra changes: specification: | * Added Appendix XXI 5G - Wireline Wireless Convergence and Appendix XXII Data Elements data-model: | * Added WWC (5G Wireline Wireless Convergence), PDU (Protocol Data Unit) and FWE (5G Wireline wireless Encapsulation) top-level objects * Updated Cellular object to be applicable to 5G Residential Gateways * Extended support for TR-471 IP-layer metrics, including new IP-layer capacity test * Supported LAN device time-based access-control * Various Wi-Fi improvements v2.13.0: date: 2019-09-13 editors: - Klaus Wich, Huawei changes: specification: | * Unified text for CWMP and USP support * Updated references data-model: | * Added support for WFA Data Elements * Added support for Multi AP * Added support for WPA3 and 802.11ax * Added support for MQTT 5.0 * Added support for Packet capture diagnostics * Updates for TR-369 MQTT support * Added support for IoT Data model v2.12.0: date: 2018-03-16 editors: - Steve Nicolai, Arris changes: specification: | * Added Appendix I, II, IV from TR-157a10 as Appendix XVII, XVIII and XIX * Added Appendix XX BASAPM and LMAP Theory of Operations * Added Annex H from TR-069a5 as Annex C data-model: | ::: CWMP ::: * Added TR-069a6 support ::: ::: USP ::: * Added USP Local agent support (TR-369) ::: * Added Firmware Image support * Added Ethernet Link Aggregation Group * Added additional Wi-Fi and WAN statistics * Added support for Two-Way Active Measurement Protocol (TWAMP) reflector * Added support for Layer Two Tunneling Protocol version 3 (L2TPv3) * Added support for Virtual eXtensible Local Area Network (VXLAN) tunnels * Added support for Broadband Access Service Attributes and Performance Metrics measurement test framework (BASAPM) * Added support for Large-Scale Measurement of Broadband Performance (LMAP) v2.11.0: date: 2016-07-18 editors: - Klaus Wich, Axiros - Mark Tabry, Google changes: specification: | * Added G.fast theory of operation data-model: | * LED status model * Layer 2 tunnel support for IP diagnostics model * DSL G.fast model * Management Frame Protection support for WiFi model * WPS 2.0 support for WiFi model * User interface toggle * User interface messaging model * ConnectionRequest HTTP service toggle * DNS fallback support for XMPP connections v2.10.0: date: 2015-11-09 editors: - Klaus Wich, Axiros changes: specification: | * No changes to the specification data-model: | * MQTT model * Bulk data over HTTP * DNS Server updates * New diagnostics state v2.9.0: date: 2014-12-01 editors: - Douglas Knisely, Qualcomm, Inc changes: data-model: | * Added support for WiFi MAC Address Filtering * Fixes for Traceroute * Added IEEE 1905 data model * Incorporated new components from TR-143 Amendment 1 v2.8.0: date: 2014-09-08 editors: - William Lupton, Cisco changes: specification: | * Updated Annex B on tunneling * Added GRE, MAP and PCP theory of operation data-model: | * Added LLDP and HTIP home network topology discovery parameters * Added G.997.1-2012 DSL parameters * Added various WiFi parameters (associated device statistics, retry limits, reports, QoS) * Added IPv6-related IP diagnostics parameters, and other minor changes * Updated G.hn data model to align with G.9962 * Added GRE and MAP data models * Added PCP data model * Added Cellular interface data model v2.7.0: date: 2013-11-11 editors: - Apostolos Papageorgiou, NEC - William Lupton, Cisco changes: specification: | * Added ZigBee and Provider Bridge theory of operation * Added backup/restore theory of operation data-model: | * Added ZigBee and Provider Bridge data models * Also added additional WiFi statistics, and other minor changes v2.6.0: date: 2012-11 editors: - Tim Carey, Alcatel-Lucent changes: specification: | * Added support M2M SCL Administration as an Appendix data-model: v2.5.0: date: 2012-05 editors: - William Lupton, Pace changes: specification: | * Added Tunneling Annex and IPsec Appendix data-model: | * Added support for IPsec and bulk data collection v2.4.0: date: 2011-11 editors: - William Lupton, Pace changes: data-model: | * Added support for G.hn and Optical interfaces * Additional WiFi parameters v2.3.0: date: 2011-07 changes: data-model: | * Added support for proxy management and alias-based addressing v2.2.0: date: 2011-02 editors: - Paul Sigurdson, Broadband Forum - William Lupton, Pace changes: specification: | * Added IPv6 and Firewall Appendices data-model: | * Added support for IPv6 and Firewall v2.1.0: date: 2010-11 editors: - Paul Sigurdson, Broadband Forum - William Lupton, 2Wire changes: data-model: | * Added support for Software Module Management v2.0.2: date: 2016-07 changes: | * Removed *SSID* unique key from *WiFi.SSID* object v2.0.1: date: 2010-11 changes: data-model: | * Fixed various ranges and defaults * Removed non interface object *Alias* parameters from profiles v2.0.0: date: 2010-05 editors: - Paul Sigurdson, Broadband Forum - William Lupton, 2Wire changes: specification: | * Original data-model: | * Original v1.7.0: date: 2015-11 status: deprecated depends-on: WT-157: v1.10.0 changes: data-model: resname: Device:1.14 text: | Incorporated new components from [TR-157 Amendment 10] expand: WT-157.components v1.6.0: date: 2014-09 depends-on: WT-157: v1.9.0 changes: data-model: resname: Device:1.13 text: | Incorporated new components from TR-157 Amendment 9 expand: WT-157.components v1.5.0: date: 2013-11 depends-on: WT-157: v1.8.0 changes: data-model: resname: Device:1.12 text: | Incorporated new components from TR-157 Amendment 8 expand: WT-157.components v1.4.0: date: 2012-11 depends-on: WT-157: v1.7.0 changes: data-model: resname: Device:1.11 text: | Incorporated new components from TR-157 Amendment 7 expand: WT-157.components v1.3.0: date: 2012-05 depends-on: WT-157: v1.6.0 changes: data-model: resname: Device:1.10 text: | Incorporated new components from TR-157 Amendment 6 expand: WT-157.components v1.2.0: date: 2011-11 depends-on: WT-157: v1.5.0 changes: data-model: resname: Device:1.9 text: | Incorporated new components from [TR-157 Amendment 5] Incorporated Femto components from [TR-262] expand: WT-157.components v1.1.0: date: 2011-07 depends-on: WT-157: v1.4.0 changes: data-model: resname: Device:1.8 text: | Incorporated new components from TR-157 Amendment 4 expand: WT-157.components # WT-157 v1.2.0 - v1.3.0 defined Device:1.6 - Device:1.7 v1.0.0: date: 2010-02 editors: - William Lupton, 2Wire - Paul Sigurdson, Broadband Forum changes: specification: text: | * Original data-model: resname: Device:1.5 text: | * Minor clarifications and additions # WT-157 v1.0.0 - v1.1.0 defined Device:1.3 - Device:1.4 # WT-106 v1.0.0 - v1.2.0 defined Device:1.0 - Device:1.2 (*) # (*) WT-143 v1.0.2 defined the original version of Device:1.2 # Work Area Directors WADs: - Jason Walls, QA Cafe - John Blackford, Vantiva # Project Stream Leaders PSLs: - Daniel Egger, BBF - Matthieu Anne, Orange # this lists recent editors in a separate 'Editors' table editors-from-versions: 10 acknowledgments: - Al Morton, AT&T - Alexandre Abdo, Sagemcom - André-Jean Côté, Snom - Arun Jayaraman, AT&T - Barbara Stark, AT&T - Boris Vanhoof, Orange - Charles Foster, BT - Chen Li, AT&T - Chris Gray, Orange - Daniel Egger, BBF - David Cluytens, Orange - David Wooley, Telstra - Gene Wang, Wistron NeWeb Corp. - Jan Michielsens - Jason Walls, QA Cafe - Jef Maerien, Orange - Johan Jacobs, Orange - John Blackford, Vantiva - Ken Kerpez, Futurewei - Laurent Alarcon, Sagemcom - Marc Sabater, MoCA Alliance - Matthieu Anne, Orange - Mike Talbert, Wistron NeWeb Corp. - Nabil Bizid, Orange - Patrick Rogier, Orange - Ramesh Rajasekaran, Nokia - Richard Holme, Vantiva - Samuel Chen, Broadcom - Srinivas Pappu, AT&T - Stephen [kiwin] Palm, Broadcom - Thales Fragoso, Axiros - Tim Spets, Nokia - Vimal Kumar, Capgemini - William Lupton, BBF